BNWAS Units for BW-800 and cable requirements


		BNWAS BW-800/flush mounting Front: 160 mm x 100 mm Cut out: 136 mm x 96 mm Depth: 55 mm Weight: 0,7 kg

		Reset unit 801 for panel/flush mounting Front: 60 mm x 60 mm Cut out: Ø = 48 mm Depth: 25 mm Weight: 0,10 kg

		Alarm unit 802 for panel/flush mounting Front: 120 mm x 60 mm Cut out: 42 mm x 108 mm Depth: 25 mm Weight: 0,10 kg


		Selector unit 803 for panel/flush mounting Front: 120 mm x 60 mm Cut out: 42 mm x 108 mm Depth: 30 mm Weight: 0,15 kg

Motion sensor 805

Size: Height: 117 mm x Width: 65 mm x Depth: 47 mm

Weight: 0,15 kg

Input voltage: 9 - 16 VDC

Current Drain: Approx.: 28 mA at 12 VDC


		Reset unit 821 with audio alarm for bridge wing (IP65) Front: 120 mm x 80 mm Depth: 60 mm Weight: 0,520 kg Wall mounting

Front: 80 mm x 80 mm

Depth: 60 mm

Weight: 0,350 kg

Wall mounting


		Foundation 811 - small for Reset unit (801) Front: 60 mm x 60 mm Depth: 25 mm Weight: 0,10 kg

		Foundation 812 - large for Alarm unit (802) Front: 120 mm x 60 mm Depth: 25 mm Weight: 0,15 kg

Foundation 813 - large for Selector unit (803)

Front: 120 mm x 60 mm

Depth: 35 mm

Weight: 0,15 kg

Wall Mounting Box 810 - for BW-800:

Dimensions: 188 x 188 x 106 mm

Depth: 106 mm

Weight: 0,5 kg

BW-800 cable requirements:

Marine proof cable min. 0,5 mm² and maximum 1 mm².

Terminals are made for maximum 1 mm² cables.

Normally a cable with 6 x 0,5 mm² wires (3 pairs) is used.

Cable requirements per unit:

801: 5 wires

802: 2 wires

803: 4 wires

805: 3 wires

821: 6 wires

831: 5 wires